performer dry sanding 7sc gold roll

About performer dry sanding 7sc gold roll

• Woodworking: Smoothing rough lumber, preparing furniture for stain/paint, removing old finishes.
• Metalwork: Removing rust, smoothing welds, polishing, preparing for coatings.
• Automotive: Body repair, removing paint, sanding primer, polishing.
• Drywall: Smoothing joint compound (mud) for a flat finish.
• Crafts & Home Improvement: General purpose sanding on various materials like fiberglass, porcelain, and art projects. 

1. Cut to Size: Tear or cut a manageable length from the roll, often folding it for more usable sides.
2. Choose Your Grit:
   • Coarse (low grit): For fast material removal (e.g., 80-120 grit).
   • Medium (mid grit): For smoothing and general prep (e.g., 180-220 grit).
   • Fine (high grit): For final finishing and polishing (e.g., 320+ grit).
3. Sand: Apply to a hard sanding block for flat surfaces or use with a power sander (respecting max RPMs).
4. Direction: Sand in one direction for less noticeable scratches; avoid circular motions unless you want visible swirl marks.
5. Flip/Rotate: As one part of the sandpaper wears out, fold or rotate to a fresh, sharp section. 

• High Efficiency: Quick material removal, especially with coarser grits.
• Versatile: Works on many surfaces.
• Economical: Rolls allow you to cut only what you need.